VALSPAR CORPORATION -- 47 8800 LATEX GLOSS ENAMEL WHITE  -- 8010-00F024553
<pre>=====================  Product Identification  =====================

Product ID:47 8800 LATEX GLOSS ENAMEL WHITE
MSDS Date:03/07/1990
FSC:8010
NIIN:00F024553
=== Responsible Party ===
Company Name:VALSPAR CORPORATION
Address:1101 THIRD STREET SOUTH
City:MINNEAPOLIS
State:MN
ZIP:55413-1211
Country:US
Info Phone Num:(612) 332-7371
Emergency Phone Num:(800) 228-5635
CAGE:06758
=== Contractor Identification ===
Company Name:VALSPAR CORPORATION
Address:1101 THIRD STREET SOUTH
City:MINNEAPOLIS
State:MN
ZIP:55415
Country:US
Phone:800-228-5635
CAGE:06758
Company Name:VALSPAR CORPORATION
Address:1101 THIRD ST. SOUTH
Box:City:MINNEAPOLIS
State:MN
ZIP:55415
Country:US
Phone:612-332-7371/888-345-5732
CAGE:23526

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM DIOXIDE, TITANIUM(IV) OXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 20%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:SILICON DIOXIDE
CAS:7631-86-9
RTECS #:VV3100000
Fraction by Wt: 1%
OSHA PEL:80 MG/CUM
ACGIH TLV:0.2 MG/CUM

Ingred Name:PROPANOIC ACID, 2-METHYL, MONOESTER
    W/2,2,4-TRIMETHYL-1,3-PENTANEDIOL, TEXANOL
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 1%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: ABSORPTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: ABSORPTION.
Medical Cond Aggravated by Exposure:RESPIRATORY OR SKIN CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
    WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
    INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:205F
Lower Limits:3%
Upper Limits:13%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM & WATER FOG
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS OR AIR
    MASKS. CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT COOL W/WATER
    SPRAY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS W/INERT
    ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
    USE. DON'T STORE >120F. KEEP FROM FREEZING. EMPTY CONTAINERS MAY
    CONTAIN PRODUCT RESIDUE.
Other Precautions:ALL LABEL WARNINGS MUST BE OBSERVED UNTIL CONTAINER
    HAS BEEN CLEANED, RECONDITIONED OR PROPERLY DISPOSED OF.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR PROPERLY FITTED RESPIRATOR APPROVED BY
    NIOSH/MSHA. FOLLOW RESPIRATOR MANUFACTURERS DIRECTIONS FOR
    RESPIRATOR USE.
Ventilation:REQUIRED WHEN SPRAYING OR APPLYING IN CONFINED AREA.
    PROVIDE AIR MONITORING.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F
Vapor Pres:24
Vapor Density:7.4
Spec Gravity:1.26
Evaporation Rate &amp; Reference:(BU AC = 1): 0.4
Solubility in Water:COMPLETE
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:67.88%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER-REACTIVE MATERIALS
Stability Condition to Avoid:FREEZING, TEMPS >120F
Hazardous Decomposition Products:CO, CO2 & METAL OXIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS. DON'T CUT,
    PUNCTURE OR WELD CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.